What does AE code mean on LG dishwasher?

The AE error code means that LG dishwasher is leaking. The drain hose is broken at the bottom of the dishwasher. The drain motor is leaking.

How to reset AE error code (reset the dishwasher):

  1. Turn off the circuit breaker for at least 60 seconds.
  2. Turn the circuit breaker back ON.
  3. Turn the unit back ON and check if the error code is removed. If not try turning the circuit breaker for a longer period untill the error is cleared.

Beside above, why is my LG dishwasher flashing? LG Dishwasher lights flashing or blinking. The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing.

Similarly, what does AE mean on washing machine?

flood protection device

How do I reset my LG washing machine?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do you manually drain a dishwasher?

Check the drain hose. You can access the drain hose by removing the kick plate on the front of the dishwasher. The drain hose runs from the drain pump on the bottom of the dishwasher to the sink drain or air gap on the sink. Use a flashlight to follow the hose to the drainage area. Correct any kinks in the line.

What does IE mean on my LG dishwasher?

An IE error code signifies that the washing machine is filling with water slowly or not at all. This can occur when water supply taps are not fully open or the water pressure to the tap or house is too low. Other possible causes are kinked, pinched or bent water line hoses, or clogged water inlet filters.

What does e1 mean?

The Meaning of E1 E1 means “Everyone”

Where is float switch in LG dishwasher?

Your float assembly is found inside the dishwasher’s tub, on the bottom. The water that fills your dishwasher lifts the float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

What does dE1 mean on LG washer?

A dE error code means that the washer was not able to lock the drawer. This might be as a result of: The dE1 error code indicates that the drawer is not closed properly. To fix this: Open and re-close the drawer as an attempt to clear the code.

What does e6 mean on LG washer?

The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a different object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer.

How do I clear the CL on my LG dishwasher?

CL – Child Lock Open the dishwasher door. Press the POWER button. Select the cycle (and desired options). Press and hold the RINSE and SPRAY buttons for three seconds. The child lock indicator will illuminate in the display once the child lock is activated. Close the door to begin the cycle.