Where do you hang curtain rods with molding?

Generally, hanging curtain brackets on the wall above and outside the window molding looks best; it allows fabric to fall gracefully. If you have detailed window frames you don’t want to cover, an inside mount (hanging curtains within the frame, as you would with a tension rod) can work.

With regard to how high to hang curtains, that depends on the situation. If you have crown molding, mount the curtain rod right beneath the crown molding. If the window is less than 6” from the ceiling, and there is no crown molding, then ceiling mounting the drapery is best.

Furthermore, where should curtain rods be placed? The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

One may also ask, where do you hang curtain rods with trim?

Use these tips to make sure you place your rods at the right height:

  1. For standard drapes that hang on either side of a window, the typical height is halfway between the top of the window casing and the ceiling.
  2. For cathedral ceilings, leave approximately four to six inches above the window trim as a guideline.

Do curtain rods go on trim or wall?

Generally, hanging curtain brackets on the wall above and outside the window molding looks best, since it allows fabric to fall gracefully.

How can I hang curtains without putting holes in the wall?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side.

Do you need sheers with curtains?

Like with curtains, you want your sheers to have a bit of a wave to them. With the height, if used in conjunction with a floor length curtain, you can either have the sheer the same length (or just an inch shorter) or only have the sheers hang down to the sill.

How do you hang curtains in an old house?

The Easy Way to Hang Curtains on Plaster Walls Step 1: Mark the Spot for the Bracket. Step 2: Drill Top Hole. Step 3: Add Screw. Step 3: Insert a Molly Bolt Into the Hole. Step 3.5: Add Screw. Step 4: Dry Fit Bracket and Mark Second Hole Hole. Step 5: Drill Second Hole and Add Screw. Step 6: Repeat for Other Brackets.

Can you hang curtains inside the window frame?

Generally, hanging curtain brackets on the wall above and outside the window molding looks best; it allows fabric to fall gracefully. If you have detailed window frames you don’t want to cover, an inside mount (hanging curtains within the frame, as you would with a tension rod) can work.

How do you hang curtains on an uneven window?

If you’re dealing with windows that are different sizes or installed at different heights, floor-length drapery panels can help make them look uniform. If one of your windows is taller than the others, mount the curtains above all the windows at the height of the tallest window so they all appear to be the same size.

Is it OK if curtains don’t touch the floor?

1. The slight float – Less than an inch above the floor. If you want to hang your curtains without any break at all, so they hang totally straight then the float is the best option for you. It doesn’t touch the floor, but only just barely.

Do curtains have to hit the floor?

To finish off the illusion that your window is gigantic, your curtains must touch the ground. Because of the line the curtains make with your eye, they need to at least touch the floor. No more hang-man curtains, or short curtains, in your space. There are a few ways you can have them touch the floor.

Should bedroom curtains touch the floor?

How Long Should Bedroom Curtains Be? The short and easy answer is that your curtains your be floor length. They should be long enough to just barely touch the floor, but not so long that they drag on the floor or bunch up in a pile.

How far should a curtain rod extend past window?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

How many curtain rod brackets do I need?

Count how many brackets are included with the curtain rod. As a general rule, there should be at least one bracket for each outside corner of the window, and one bracket in the center. Add more brackets if the expanse between the middle and outer brackets is more than three feet.

Are short curtains out of style?

Short Curtains Visually speaking, high-water style is not the most appealing way to hang curtains. The shorter length can appear dated. Also, it can cut the visual height of your room in half. From a purely practical standpoint, however, short curtains are sometimes the best option.